Compatible Brother TN360 toner: installation, yield and savings | Star Toner

If you want to keep your Brother printer running without paying the premium for the branded consumable, the compatible Brother TN360 toner is a direct alternative. Here we explain exactly what it is, which machines it fits, how to install it and what to do if your printer "doesn't recognise" the cartridge.

What it is and which printers it fits

The TN360 is a black toner cartridge with a yield of 2,600 pages (based on 5% coverage under the ISO/IEC standard). It works with these Brother models:

• DCP-7030, DCP-7040, DCP-7045N
• HL-2140, HL-2150N, HL-2170W
• MFC-7340, MFC-7345N, MFC-7440N, MFC-7840W

If your machine appears in this list, the cartridge fits physically and electronically without any adapters. You can review all the details on the compatible TN360 toner product page.

How to install it and what to do if "the cartridge is not recognised"

Installation is straightforward: switch off the printer, open the front cover and pull out the drum + toner assembly. Push the green locking lever, separate the used toner from the drum and click the new cartridge into place until you hear it lock. Refit the complete assembly and close the cover.

On these models, the toner and the drum are separate parts. The drum has a far longer service life and is only replaced when the corresponding warning appears; for that you have the compatible DR-2000 / DR-350 drum.

These Brother series don't use an electronic chip: the toner counter is managed mechanically via an optical window and a sensor inside the machine. That's why, if after fitting a new cartridge the printer still shows "replace toner" or "toner empty", it can almost always be resolved with a manual reset. The usual procedure is: with the front cover open, enter the toner reset menu (on machines with a display) or press the button combination indicated in your model's manual, select standard or high-capacity toner and confirm. Always check the exact keys for your machine, as they vary between the HL, DCP and MFC series.

Yield and savings versus the original

Our compatible TN360 is calibrated to deliver the same 2,600 pages of nominal yield as the reference cartridge, with a stable black density on office text and graphics. The real difference lies in the cost per page: a compatible consumable noticeably reduces what you pay for each printed document, without changing your printer or your workflow.

If you want to understand that difference properly, we've done an honest comparison by printing original and compatible side by side, and we explain how to work out your real spend in our guide to the real cost of printing.

Why buy it from Star Toner

The compatible Brother TN360 toner is available for €8.99 and ships from Spain.

Your Startoner consumable is covered by a three-year legal conformity guarantee. Printer coverage is governed by the manufacturer’s terms and may exclude damage caused by consumables. Using a compatible cartridge does not by itself establish the cause of a fault; keep your documentation and contact us if a problem occurs.

Ready to restock? Get your compatible Brother TN360 toner here.

Frequently asked questions