HP 143A W1143A compatible toner: guide for your HP LaserJet 432fdn
UpdatedShare
The compatible HP 143A toner (reference W1143A) is a monochrome cartridge designed for anyone who prints in black every day and doesn't want to pay the price of the original. At Star Toner you can get it for €5.98 . Where a product page states a page yield, check its declared test protocol: ISO/IEC 19752.
What it is and which printers it works with
It is designed and validated exclusively for these models:
- HP LaserJet 432fdn
- HP LaserJet MFP 432fdn
If your machine is one of these two, this is the correct consumable. If you want to understand the real differences between a compatible cartridge and an original one, we compare them without the hype in original vs compatible, printed side by side.
How to install it and what to do if it "doesn't recognise the cartridge"
Installation is straightforward: switch off the printer, open the front cover, remove the used cartridge, take the new one out of its packaging, spread the toner evenly with a gentle side-to-side rocking motion and remove the protective seal. Insert the cartridge until it clicks into place and close the cover.
If a cartridge not recognised or non-genuine warning appears when you switch it on, it doesn't mean the toner is faulty. Try these steps:
- Switch off the printer, wait about 30 seconds and switch it back on so the machine re-reads the chip.
- Remove and reinsert the cartridge, making sure the chip contacts are properly aligned and clean.
- If the message persists, accept it or press to continue: in many cases it is simply a warning, not a block.
Bear in mind that HP releases firmware updates that can make these warnings stricter. We explain how to handle it in when HP firmware blocks cartridges.
Yield and savings compared with the original
The difference lies in the cost per page: a compatible cartridge significantly reduces the cost of every print without changing your workflow.
To work out how much each sheet really costs you and compare scenarios, check our guide on the real cost of printing. And if you also work with colour machines, you have high-yield compatible options such as the HP CF450A toner.
Why buy it at Star Toner
Your Startoner consumable is covered by a three-year legal conformity guarantee. Printer coverage is governed by the manufacturer’s terms and may exclude damage caused by consumables. Using a compatible cartridge does not by itself establish the cause of a fault; keep your documentation and contact us if a problem occurs.
You can buy the compatible HP 143A W1143A toner directly on its product page, with fast delivery and stock available. The right consumable, at the right price, for your HP LaserJet 432fdn.
Frequently asked questions
Does the compatible HP 143A toner work with my HP LaserJet MFP 432fdn?
Yes. This compatible W1143A cartridge is validated exactly for the HP LaserJet 432fdn and HP LaserJet MFP 432fdn models. If your machine is one of these two, it is the correct consumable.
How many pages does the compatible HP 143A W1143A toner print?
It yields 2,500 pages measured under the ISO/IEC 19752 standard at a standard 5% coverage per page. The actual coverage depends on what you print.
My printer says 'cartridge not recognised', is it faulty?
Not necessarily. Switch off the printer for 30 seconds and restart it, reinsert the cartridge while checking the chip contacts and, if the warning persists, accept it to continue. It is usually a firmware message, not a toner fault.
3-year Startoner consumable warranty
No. In Spain the statutory guarantee covers the use of compatible consumables and using them does not void the machine's warranty.
See the full range: Compatible HP Toner
Was this article helpful?
Ask us about your printer
Tell us the model and we will confirm the right cartridge. We reply within 24h.