Compatible Brother DR-2000 / DR-350 drum: installation, reset and compatibility

The compatible Brother DR-2000 / DR-350 drum is the imaging unit (drum unit) that works alongside the toner in many Brother 20xx-series monochrome laser printers and their multifunction models. It is worth understanding exactly what this part does before buying it, because it is not the same as the toner cartridge: the drum transfers the toner onto the paper and wears out with use, not when the toner runs out.

What the drum is and which printers it fits

In these Brother machines the system is split into two independent consumables: the toner, which runs out quickly and is changed frequently, and the drum, which lasts many more cycles. That is why you can reuse the same drum across several toner changes, and only replace it when the printer warns that it has reached the end of its life or repeated defects appear on the page (streaks or marks at fixed intervals).

This compatible DR-2000 / DR-350 drum is designed for these models:

• Brother DCP-7010, DCP-7020, DCP-7025
• Brother HL-2030, HL-2040, HL-2070N
• Brother MFC-7220, MFC-7225N, MFC-7420, MFC-7820N

The drum and the toner are separate parts. If you also need the toner cartridge for this same family of machines, we have the compatible Brother TN360 / TN2120 toner with a 2,600-page yield.

How to install it and what to do if it "isn't recognised"

Installation is straightforward. Open the front cover and remove the complete drum + toner assembly. Separate the toner cartridge from the drum, fit the toner into the new drum unit until you hear it click, and slide the assembly back into the printer. Always work away from direct light, as the drum is light-sensitive and must not be exposed to direct light.

In these Brother models the drum's end of life is controlled by an internal counter, not by an electronic chip. That is why, after fitting a new drum, you usually have to reset the counter manually so that the replacement warning disappears. The general procedure is: with the front cover open and the printer switched on, hold down the relevant key (on the HL models this is usually a button; on the DCP/MFC models it is accessed from the menu using the arrow keys) until the display or the LEDs confirm the reset. Check the manual for your specific model for the exact combination, as it varies between the HL series and the DCP/MFC multifunction models.

If a drum message appears at start-up, it is almost always this counter and not a fault with the product: once you reset it, the warning clears.

Yield and savings compared with the original

A compatible drum offers the same function as the original at a noticeably lower cost per page, which reduces the total cost of keeping the printer running. As a long-life consumable, its impact on the cost per print is low if it is combined with compatible toner as well. If you want to work out your real spend, our article on the real cost of printing will help, and to see the difference in quality compared with the original, take a look at our original vs compatible printed side by side comparison.

Why buy it from Star Toner

At Star Toner we work with compatible consumables manufactured under quality control, with a legal guarantee and delivery to mainland Spain. Buying compatible is perfectly legal and does not void your printer's warranty; we explain this in detail in our guide to the legal guarantee of compatible cartridges in Spain.

You can get the compatible Brother DR-2000 / DR-350 drum for €11.98 with fast delivery. A low-cost replacement part that keeps your Brother 20xx-series printer producing quality prints for thousands of pages.

Frequently asked questions